Study of Compatibilized Liquid Crystalline Polymer/Cyclic Olefin Copolymer Blends

The technology to produce compatibilized blends of liquid crystalline polymer and highly amorphous cyclic olefin copolymers through two novel approaches were studied. The first approach was to use silane-functionalized halloysite nanotube as nonspecific compatibilizer and the second method was reactive compatibilization. The study of blends and their resulting microstructure; their thermal, mechanical, and viscoelastic properties were investigated. The kinetic study of blends compatibilized through both routes was performed.     

Prolong the durability of La2Zr2O7/YSZ TBCs by decreasing the cracking driving force in ceramic coatings

Service lifetime and thermal insulation performance are both crucial for the application of thermal barrier coatings (TBCs). In this study, layered structure design under equivalent thermal insulation conception is introduced to lower the cracking driving force in TBCs, and with the goal of prolonging TBCs lifetime. Three groups of layered LZO/YSZ TBCs were designed with same thermal insulation of 500?μm YSZ, the LZO layers were deliberately designed with different initial elastic modulus. Virtual crack closure technique (VCCT) calculation result showed that the energy release rates at the crack tips are 28.2, 22, and 18.8?N/m corresponding to the initial elastic modulus of 70, 60, and 50?GPa. After gradient thermal cyclic tests with surface temperature of 1300?°C, TBCs with lowest initial elastic modulus showed the longest lifetime, and more than double of pure YSZ TBCs. This study provides a new option for the improvement of TBCs lifetime.     

Experimental study on the behavior of eccentrically loaded circular footing model resting on reinforced sand

In this study, an experimental investigation has been conducted on a circular footing model subjected to eccentric load resting on the geonet-reinforced sand. To this end, five series of tests were carried out in order to evaluate the effect of reinforcement dimension and eccentricity on the bearing capacity, settlement, and rotation of the footing. Results show that the bearing capacity ratio (BCR) is in direct relationship with eccentricity and the impact of soil reinforcement at low settlements is much more significant in the case of eccentric loading. Additionally, the bearing capacity interaction diagram and variation in the position of rotation line at different load levels for reinforced and unreinforced conditions are presented.     

Cyclic Peptide Mimotopes for the Detection of Serum Anti–ATIC Autoantibody Biomarker in Hepato-Cellular Carcinoma

Tumor-associated (TA) autoantibodies have been identified at the early tumor stage before developing clinical symptoms, which holds hope for early cancer diagnosis. We identified a TA autoantibody from HBx-transgenic (HBx-tg) hepatocellular carcinoma (HCC) model mouse, characterized its target antigen, and examined its relationship to human HCC. The mimotopes corresponding to the antigenic epitope of TA autoantibody were screened from a random cyclic peptide library and used for the detection of serum TA autoantibody. The target antigen of the TA autoantibody was identified as an oncogenic bi-functional purine biosynthesis protein, ATIC. It was upregulated in liver cancer tissues of HBx-tg mouse as well as human HCC tissues. Over-expressed ATIC was also secreted extracellularly via the cancer-derived exosomes, which might cause auto-immune responses. The cyclic peptide mimotope with a high affinity to anti-ATIC autoantibody, CLPSWFHRC, distinguishes between serum samples from HCC patients and healthy subjects with 70.83% sensitivity, 90.68% specificity (AUC = 0.87). However, the recombinant human ATIC protein showed a low affinity to anti-ATIC autoantibody, which may be incompatible as a capture antigen for serum TA autoantibody. This study indicates that anti-ATIC autoantibody can be a potential HCC-associated serum biomarker and suggests that autoantibody biomarker’s efficiency can be improved by using antigenic mimicry to native antigens present in vivo.     

Enzymatic Synthesis of 1‐Alkyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate Using a Novel Lysoplasmalogen‐Specific Phopholipase D

Many phospholipase Ds (PLDs) are known to catalyze transphosphatidylation as well as hydrolysis of phospholipids. Transphosphatidylation of lysoplasmalogen (LyPls)‐specific phospholipase D (LyPls‐PLD), which catalyzes hydrolysis of ether lysophospholipids such as LyPls and 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine (Lyso‐PAF), still remains unclear. This study aims to reveal the transphosphatidylation activity of LyPls‐PLD, that is, the production of cyclic ether lysophospholipid. The enzymatic reaction is conducted in a buffer system, and the reaction products of a novel LyPls‐PLD from Thermocrispum sp. are investigated using mass spectrometry (MS). MS analyses demonstrate the reaction products to consist of 100% 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate (cLyPA) and choline from Lyso‐PAF; however, 1‐alkenyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate from 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine and 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphoethanolamine is not produced. These results are expected to help in elucidating the catalytic mechanism of LyPls‐PLD, that is, the rate‐limiting step, and indicate LyPls‐PLD to be useful for the one‐pot synthesis of cLyPA. Practical Applications: A novel phospholipase D, LyPls‐PLD, can exclusively synthesize cLyPA from Lyso‐PAF using a one‐step enzymatic reaction without an organic solvent. cLyPA could be expected to show bioactivities similar to those of cyclic phosphatidic acid, which promotes normal cell differentiation, hyaluronic acid synthesis, antiproliferative activity in fibroblasts, and inhibitory activity toward cancer cell invasion and metastasis.     

基于AMESim的液压马达加载系统研究

液压马达作为液压系统的执行元件在工程机械上广泛应用,针对液压马达加载工况下的输出特性,利用Simulink和AMESim软件对系统进行联合仿真建模,并对系统的运行状态、控制性能、回收性能进行研究,对液压马达加载系统的设计和改进具有重要的参考意义。     

加强配装管理 保证商品煤质量

西山煤电股份公司马兰矿选煤厂在选煤生产过程中,会出现精煤灰分不稳定的现象。为解决因生产质量不稳定,导致产品质量不合格或者过剩的问题,经过研究,摸索出一套简单、准确、直观,适合各个选煤厂配装的管理模式,并通过柱状图、加权统计等方法进行分析,做出配装方案。实践证明,该方法能够把不同质量的精煤通过配煤达到产品质量合格,避免不合格产品出厂,使选煤厂在生产过程中提高分选密度及精煤产量,使精煤回收率达到上限,数量效率、质量效率达到最大,提高了经济效益。因此,该方法值得推广与借鉴。     

Effect of surcharge loading rate and mobilized load ratio on the performance of vacuum–surcharge preloading with PVDs

The results from three laboratory model tests performed under various vacuum and surcharge loads with PVDs are reported. Different SLRs were adopted to investigate the effect on the consolidation of dredged soil. To measure the lateral displacement, a refitted inclinometer was developed and tested. In the tests, the settlement, lateral displacement, and vane shear strength were measured, and the degree of consolidation (DOC), horizontal coefficient of consolidation (C_h), and bearing capacity were calculated. The results indicate that larger SLR values promote consolidation. The largest vane shear strength, settlement, and C_h values were all obtained under the highest SLR, and the bearing capacity under this SLR was more than double that under the lowest SLR. The DOC was found to increase with the growth of the SLR. However, considering the vacuum pressure was higher in Case-III, the influence of SLR on reinforcement effect may not be so significant.     

含水率对砂岩动态拉伸强度的影响

工程中的岩石具有不同的含水性，研究不同含水率岩石动态力学性质的变化规律，对岩石工程的设计和建设具有很强的指导意义。为研究不同含水率对砂岩动态拉伸强度的影响，利用霍普金森压杆（SHPB）试验装置对不同含水率试样进行了一系列动态巴西劈裂试验，研究了不同含水率砂岩在不同加载率条件下的动态拉伸强度变化规律。试验结果表明：岩石的动态拉伸强度随着加载率的增加而增加，其率相关性与含水率有关，饱和试样的率相关性较强，而干燥岩石的动态强度对加载率的变化不敏感。当加载率较低时，岩石的拉伸强度随着含水率的增加而降低；当加载率较高时，由于水的Stefan效应，水对岩石裂纹产生抗力，阻碍其扩展，导致岩石强度增加，饱和试样的动态拉伸强度出现高于非饱和试样强度的现象。     

粉土界面恒刚度循环剪切试验研究

竖向循环荷载作用下桩土界面的作用机理是研究桩土摩擦疲劳的关键。针对循环荷载作用下桩-粉土界面的剪切性能,使用改进的剪切试验装置在恒刚度条件下进行循环剪切试验,研究循环次数、累积位移和法向刚度对其摩擦疲劳性能、循环后单调剪切性能的影响。试验结果表明,粉土在循环剪切过程中,法向应力和剪应力在初始10个循环内随循环数增加快速衰减,随着循环进行,逐渐趋于稳定;单次循环内在剪切位移方向变化时,土体呈现表现出剪缩-剪胀-剪缩交替现象,总体变形呈现剪缩的趋势;循环荷载作用下,粉土界面的法向应力和剪应力随法向刚度增大衰减速率增大,达到稳定的累积循环位移越小;粉土循环后的单调剪切、法向应力恢复的单调剪切的剪应力比小于首次单调剪切试验值,且法向应力恢复的循环后剪切试验的剪胀程度较小,表明循环剪切过程中界面处粉土颗粒棱角破碎,颗粒变得光滑。在对试验数据分析的基础上,提出了与累积位移、法向刚度和初始应力相关的无量纲累积位移,建立了法向应力和界面摩擦角随累积位移的衰减方程。